Leather Aniline Dye Stain - Custom Mixed Colour

Aniline Dye Stain is suitable for use on unfinished leathers; aniline, semi-aniline, waxed, oil pull-up leathers.

Generally not suitable for use on pigmented (painted/coated). Not suitable for use on car leather.

50ml: Small touch-ups or 1 x seat cushion top

125ml: 2-3 x standard sofa seats or 2 armrests or 1 hangbag

250ml: 3 x standard seat cushions

500ml: 1 x recliner or 6 x bar stools or 1 x small 2 seater

1L: 1 x 2.5 - 3 seater lounge

2L: 1 x 2.5 - 3 seater lounge plus armchair plus chaise

3L: 1 x large lounge suite

Note: Coverage estimates are approximate. Coverage is affected by a number of variables such as the type and condition of your leather, the amount of coatings on the surface, how dry and porous the leather is and the method of application. Your job may require more or less of one or more kit component.

SUMMARY
1) Clean*
2) Stain
3) Optional: Topcoat*
** Sold separeately and in kits

Detailed Directions
1) Pour some dye on to a sponge and squeeze to incorporate

2) In an inconspicusous place, do a test spot. If the colour matches your needs, continue to Step 3.

If too dark or intense, pour a portion of the Dye Stain into a clean vessel (such as a plastic cup) and dilute with water to create a paler colour. Test again. Continue testing until you achieve the colour intensity you desire. Adjust the remaining Dye Stain as needed.

If the colour is close, but not exactly right for your job, other colours can be used to adjust it. Sold separately.

If the colour is to pale, apply additional coats to the test spot until the depth of colour you need is acheived.

3) Moving at an even speed and applying moderately firm, even pressure, wipe over one area at a time. Experiment with different strokes; eg circular or long, straight strokes. Continue untill all areas are done.

4) Repeat until all areas have been treated.

Note: Due to the penetrating behaviour of Aniline Dye Stain, the fibrous nature of leather, and the variable condition of previous coatings, staining may not produce completely even results. Using several applications can help to even out the colour.

Ideal for: Staining leather with transparent colour.

Use with: Can be used with Spot & Prep (No.4), Topcoat (No.7), Colour Restoration Cream (No.32).

Application schedule: Every piece of leather is different as is the amount and type of usage. Leather dye stain can easily be touched-up if or as needed.

Application method: Apply by hand using a sponge or brush or use a spray gun and compressor

Best accessories: A soft bristle scrubbing brush, applicator sponges, gloves, sandpaper, drop-sheets, and plenty of disposable and/or white microfibre cloths.

Instructions: On the label, Directions for Use, under the How To tab.

Drying time: Pentrates immediately and usually takes 30 mins to 1 hour to dry. A hairdryer can be used to speed drying.

Time before use: Allow 1 hour then test for colour transfer using a white cloth. If colour is transferred, allow more drying time. If dyes continues to transfer, seal with Topcoat (No.7)

Available in a kit: Yes, this product is available in a value kit with the other products used to refinish leather.

Tips:

Use all resources provided to get the most out of your purchase

Success starts with a well prepared surface

When cleaning, work quickly and use a brush to agitate into the grain and use firm pressure when cleaning

Aniline Dye Stains are mixable so your colour can be adjusted as needed

Can be recoated to build depth of colour as needed

Test before use: Always test products in an inconspicuous area first.

Storage: Lid on tight and away from direct UV light and heat (in a cool dark cupboard). Avoid contaminating the contents with baterial sources including skin.