Leather Master Colour Set
Master Colour Set
A universe of colours is at your fingertips with these 5 master leather colours.
- Contains Colour (No.6) Leather Paint
- 2 sizes
- Colours included are Black, Blue, Scarlet, Ochre and White
- Mixable; create an endless array of unique colours
- Use to adjust your base colour to achieve a perfect colour match for your job
- Professional-grade, waterbased pigment specifically designed for colouring, recolouring or changing the colour of leather and vinyl
- Apply by sponge, brush or air-brush in thin coats; no globby painted look, just a beautiful factory finish
Get creative
Get creative with your op-shop fashion finds. Finally, fix up that colour wear on your car seats or touch-up the bingles on your sofa. Colour (No.6) is part of our Repair and Recolour system. It is recommended for use in conjunction with surface prep, primer and topcoat for optimal results.
All types
Use as needed.
Cut a patch that is 1.5 to 2 times the size of the opening in the leather. Insert it under the opening. The patch can be anchored in two ways:
1) Glued: Apply glue to the edges of the underside of the hole. Wait until the glue is almost dry then add an additional layer. Wait a few minutes for the glue to become tacky. Join and firmly hold the parts in place until bonded. Depending on the amount of glue used, humidity and porousity of your leather, this may be minutes or a couple of days. Wipe away excess immediately.
2) Stitched: Insert the sub-patch then stitch through the edges of the leather opening and through the mesh.
Glue can be applied after stitching.
Always clean leather and vinyl before gluing. Wash up in water. Keep airtight.
Glue (No.16)
20gm
50gm
250ml
500ml
1L
2L
3L
Brushes, microfibre cloths and palette knife can be cleaned, stored in a cool dry place and reused as needed.