Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia
Leather Paint - Custom Mixed Colour Leather Repair & Recolouring Leather Hero Australia

Leather Paint - Custom Mixed Colour

$111.95 Sale Save
Size 1L

Only 0 left in stock

Ordering Custom Mixed Colours

When ordering a custom mixed colour, purchase the:

  1. products you want and
  2. Custom Colour Mixing Service 

Details, terms and conditions for the service are available on the Custom Colour Mixing Service page.

Colour (No.6)

This is a tannery standard leather colourant. It let's you recoat over stains, repairs, and colour wear. It gives full coverage, which means you can recoat in the same colour or a new one. Self-sealing, rub-resistant and colour-fast, it produces a sleek, satin show-room finish just like the original finish on your pigmented leather.

  • Full coverage concentrated leather pigment 
  • Flexible coating with excellent adhesion and wear properties
  • Available in 85 premixed colours; Australia's largest range
  • Durable, self-sealing and won't rub off onto clothing
  • Formulated for pigmented (painted/coated) leathers and can be used on most other types 
  • Suitable for use over leather glue and filler
  • Water-based, fast drying, non-toxic, Australian made and used by professionals
  • Apply by sponge, spray gun, brush or foam roller to prepped leather
  • Colours can be mixed to create your own colour
  • Best used in conjunction with correct surface prep, primer and a protective topcoat 
  • Recommended for use in conjunction with a Repair & Recolour Kit

Recoat old, worn, stained coatings and conceal repairs

When accidents happen and wear and tear takes a toll, refinishing worn coatings and filled repairs can dramatically revamp the look of your leather. 

Don't be afraid of the word 'paint'.

This colourant is often referred to as 'leather dye'. Dyes and paints are different and whilst some leathers are dyed, most furniture and all car leathers are painted. If your leather is a solid, block colour such as white, beige, or red for example, it is coloured with leather paint. 

For sofas, cars, apparel, bags and lots of other leather

From small touch-ups on your car seats to recoating your steering wheel, to changing the colour of an occasional chair or recolouring an entire lounge suite, this product has a wide range of applications.  

The hero of our tannery grade refinishing system

When your pigmented leather was made, it was coated with primer, colour and topcoat. By using the same layering process, a beautiful, wear-resistant transformation is possible. 

Colour & sheen

Sample Pots are ideal for testing colours on your leather.

Colours prefixed with the word 'Aniline' are leather paints with a small proportion of dyes. They give a somewhat semi-aniline look. Note that paints are UV stable whilst dyes are prone to fading in high UV environments.  

The leather paint has a satin finish. You can make it flatter by adding Dulling Agent (No.30) or increase the shine by using Topcoat Gloss or High Gloss. 

Want to know more about the products? Read through the info on this page then head to the How To library to learn more about choosing your colour and topcoat and how to use the products.

Need accessories for your job? Here they are.

Instructions: Print the Directions for Use, Tips and Details  

This product is suitable for use on pigmented (painted/coated) leather. It can also be used on synthetic/man-made leather. (Due to the plastic nature of synthetic leather, coatings durability may be reduced compared to when applied to real leather).

If you would like to completely cover stains and permanently changes the finish of your aniline and semi-aniline leather to pigmented (coated/painted), this product is suitable. Using the complete finishing system is recommended for best results: surface prep, primer, leather paint and topcoat.

50ml: 1 medium pair shoes or 1 steering wheel or1 sofa armrest

25ml: 2-3 dining chairs or 2-3 sofa seats

250ml: 1 armchair or 4 dining chairs or 2 car seats

1L: 1 standard 2-3 seater sofa or 1 car interior

2L: 1 large modular sofa or 1 x 3 seater plus 1-2 armchairs

3L: 1 large modular sofa or 2 x 3 seaters plus 1-2 armchairs

Note: Coverage estimates are approximate. Coverage is affected by a number of variables such as the type and condition of your leather, the colour, whether you are changing colours or touching up the original colour and the method of application. Your job may require more or less of one or more kit component.

1) Clean*
2) Repair*
3) Prime*
4) Colour
5) Topcoat*
****Sold separately and in kits
For best results, use the full refinishing system. If you are only using Leather Paint, read steps 1, 2, 4, and 10.

1) Work area
Lay down drop sheets to protect your work area and ensure good ventilation.

2) Vacuum
Vacuum to remove pet hair, dust and loose particles.

3) Surface Prep
Spray Spot & Prep (No.4) on one area at a time. Use a brush to agitate into the grain. Use a cloth to wipe away dirt and grime from the leather. Repeat until the leather is thoroughly clean and free of soiling, oils, silicones, waxes and emollients.

4) Key the surface
Lightly sand the areas you intend to recolour. Usually 400-800 grit is ideal. Sanding helps to remove any loose or flaking coatings, smooth surface irregularities, and keys the surface to promote a good bond between the old coatings and new. When done, wipe over to remove dust.

For leather that is not damaged and does not require repairs, go to Step 7.

5) Glue
If your leather is damaged (cat scratches or tears) use a tiny amount of Glue (No.15) to glue down any loose tags or coat the open edges and join them together. For tears, apply one layer of glue, wait until it comes semi-dry (tacky), then apply a second layer. Join edges and hold firmly for a few minutes or until dry. Masking tape can be used to hold the sides together until bonded. For larger rips (greater than 3cm), try backing the hole with a large patch of mesh, silk, fabric, leather, or vinyl. Glue the underside edges of the rip to the backing (not the entire area as the glue may create a stiffened area) and hold or tape in place whilst curing. Keep the upper surface clean by wiping away any excess glue as you go. When completely dry, sand the area to remove or smooth any unwanted glue residue.

6) Fill
Conceal any repair joins or surface damage such as scratches, cracks and pits with Fill (No.14). To do this, load a small amount of Fill (No.14) onto the underside of the spatula, lay the spatula almost flat and wipe across the repair site. Use light steady pressure to press a thin layer of filler into the hollows and use a gentle sweeping action to feather the edges and minimise unwanted ridges of filler. Allow to dry before applying further thin layers as needed. Allow to air dry or use the sun or a hair dryer to speed drying time. In some cases, it is prudent to allow overnight drying. When dry, smooth using sandpaper. For larger repairs, a hand-held mini power sander can be used with caution. To mimic leather grain, try using a stippling (dabbing) technique for your last layer or two. This can create soft peaks that resemble leather grain when lightly sanded after curing.

7) Prime
Using an applicator sponge, apply an even coat of Prime (No.5) and gently push it into the grain of the leather. Allow drying. In high traffic areas such as seat cushions and armrests or side bolsters in cars, apply a second coat then allow drying.

Note: Engage a helper to hold cushions apart or use dowl to hold them apart whilst they are being coated and dried. This product is designed to stick. Ensure freshly coated areas are dry before allowing newly coated faces to touch.

If you are not mixing your own colour, go to Step 9.

8) Mix colour
If you intend to mix your own colour and have purchased extra colours for tinting the main colour add a drop, a few drops or a dash of colour at a time. Shake or stir to mix. If your colour is likely to require a lot tint, empty the base colour into another vessel for mixing (eg, mixing bowl, plastic bottle or plastic cup). Test the new colour before proceeding. To do this apply a 1cm spot, dry it with a hair dryer (at 30cm) then decide if or how to adjust your colour. Clean off your test colours as you go as they are easily removed when fresh. When satisfied with the colour move on to the next step.

If you want a Satin, Gloss or High Gloss result, go to Step 10.

9) Adjust shine
If you want a Matte result, add 5%-10% Dulling Agent (sold seperately) to the Colour (No.6). More can be added if desired. Test as you add. Apply a 1cm spot, dry it with a hair dryer (at 30cm) then decide if more Dulling Agent is needed to achieve a good match with the original finish or to achieve a level of shine that is right for your job. Dulling Agent can also be added to Topcoat (No.7) if needed.

10) Colour
Use an applicator sponge, roller or spray-gun to apply Colour (No.6) evenly over the repair site or project. If finishing a repair, wipe the sponge over the surface and blend the edges using fast, light, feathered strokes. If doing a full recolour, use even strokes to ensure even coverage. Gently push the first coat of paint into the grain and any crevices. Wipe excess product from seams to avoid pooling. The first coat will not look neat or even. Allow to dry and repeat until your desired coverage is achieved. Several thin coats are preferable. There is no 'normal' number of coats as each piece of leather is different, some colours build overage faster than others, and the various application methods also impact the number of coats needed. If you are changing colours, it is likely that more coats will be needed than if you are refinishing in the same colour. Mild sunshine or a hair dryer can be used to speed drying between each coat. Again, hold cushions apart whilst they are being coated and dried.

It's recommended that you allow a few days for big projects like recolouring a sofa. After your first 1-2 coats of colour, give the new coatings a day or 2 to dry before proceeding with the next few coats. When you are happy with the colour coverage, allow another 2 days drying before applying Topcoat. Avoid soiling and skin contact during the refinishing process.

11) Topcoat
Apply topcoat using a sponge, roller or spray-gun. Use long even strokes to achieve full coverage. Allow drying. Apply a second and final coat. Prioritise high traffic areas. Allow to dry. Dulling Agent (sold separately) can also be added to Topcoat (No.7) to make it less shiny if needed. Reminder to prevent freshly coated faces touching unitl they are dry. Note: Matte topcoat is best applied with a spray gun. If hand application leaves a streaky finish, try mixing approximately 10% Colour (No.6) into your second coat of Topcoat.

Prime and Topcoat can be diluted with 10% water if needed to extend the amount of product.

After care
Allow at least 48 hours drying time before using your leather again. It takes 14 days for the coatings to fully cure. Extra care is recommended during this time to avoid scrapes or coating disturbance. After a few days of drying, condition with Nourish (No.2) and protect with Protect (No.3) (available separately or in The Leather Care Kit). When dry, an otional step is to buff to render a beautiful feel and finish.

Touch up scuffs and general surface wear using the same process or with Colour Restoration Cream in the same colour (available separately online at Leather Hero www.leatherhero.com.au).

Ideal for: Coating leather with a coloured finish.

Use with: Can be used with leather filler, glue and binder to repair and correct surface damage before recolouing. When all colour work is completed and cured, apply Nourish (No.2) and Protect (No.3)

Application schedule: Every piece of leather is different as is the amount and type of usage. Leather coatings can easily be touched-up if or as needed.

Application method: Apply by hand using a sponge or brush or use a spray gun and compressor

Best accessories: A soft bristle scrubbing brush, applicator sponges, gloves, sandpaper, drop-sheets, and plenty of disposable and/or white microfibre cloths.

Instructions: On the label, Directions for Use, under the How To tab.

Drying time: Each coating may take around 30 mins to 1 hour to dry. A hairdryer can be used to speed drying. Your project will be touch dry in an hour, dry in 2 days and cured in 14 days.

Time before use: Allow at least 2 days before using if possible.

Available in a kit: Yes, this product is available in a value kit with the other products used to refinish leather.


Use all resources provided to get the most out of your purchase

Success starts with a well prepared surface

When cleaning, work quickly and use a brush to agitate into the grain and use firm pressure when cleaning

Colours are mixable so your colour can be adjusted as neededIf you have lots of product on hand, give extra attension to the high wear areas

On big jobs, allow overnight drying after 1-2 colour coats and again prior to applying the topcoat.

Sometimes a few days drying is helpful

Test before use: Always test products in an inconspicuous area first.

Storage: Lid on tight and away from direct UV light and heat (in a cool dark cupboard). Avoid contaminating the contents with baterial sources including skin.

Every 3 months :

1) Clean with Cleanse (No.1) to remove soiling, body oil and perspiration
2) Condition with Nourish (No.2) to moisturise, maintain suppleness and prevent cracking
3) Protect with Protect (No.3) to minimise soiling, make cleaning easier and reduce UV damage

Servicing can be more frequent on high traffic zones; eg drivers seat, front face of favourite seat/chair, everyday use leather. Wiping with a damp cloth between services also helps to remove damaging factors.

Buy it with


Showroom finish

Restore worn coatings, cover stains and repairs, correct colour variations and dramatically improve the look of your leather car seats, furniture, apparel and more.

Full coverage lets you recoat in the same colour or a different colour.

Not sure which colour? Try a few out using Sample Pots.

Put back what the years have taken away

Wear and tear happens over time. Recoat the worn areas or the whole piece using the same system the professionals use and achieve beautiful results.

For a pro finish and optimal durability, use this Leather Paint after thorough surface prep with Spot & Prep (No.4) and Prime (No.5). Once dry, seal and protect it with clear Topcoat (No.7).

Before & Afters

Customer Reviews

Based on 23 reviews
S Gifford

i just painted a sofa absolutely thrilled with the way it's turned out

Sarah Thompson
I love this product!!

I love this product so much, my jacket looks like new, I am about to buy some more for my cowboy boots!! I would highly recommend :)

Andrew Galley
Restoration of leather reclining chairs

we have had these chairs for nearly twenty years and they were starting to show their age although the leather was in great condition the colour was thin in a number of places and had stain. The colour butter was slightly too dark but by trial and error using white I managed to get the exact colour. The chairs have come up wonderfully and should last our lifetime.

Paul Cooper
The colour match was perfect

I tried a few colours from the stock list. I ended up sending a headrest to Sydney to have the colour matched which was done perfectly.
It was a big job, but the results are spectacular. The leather looks and feels like new.

Daniel Hodge
Awesome costumer service

Very easy to talk too. Australian post lost my parcel and Leather hero replaced it no worries.