Leather Repair Surface Filler 

Fill cat scratches, cracks and other surface imperfections with this professional leather filler.

Leather Hero; Australia's Premier Leather Care & Repair Company

The leather filling compound is water-based and air drying making your leather repair work quick and easy. Use it to fill in shallow surface damage such as scuffs, scratches, grazes, delamination and nicks. Apply with a sponge or palette knife in thin layers. When dry, sand to smooth. To conceal the repaired area, use our leather finishing system (primer, colour and topcoat available separately and in kits). 

When accidents happen and time takes a toll, there's nothing stopping you from 'turning back time' when it comes to the look and feel of your valuable leather upholstery. Leather Hero's leather repair products are made and owned in Australia. 

Available in 8 colours and 3 sizes. White filler can be tinted with leather paint and/or dyes. 

Fast flat rate shipping from our Australian warehouse.

Professional Grade
Easy To Use
Water Based
Ozone Friendly
Non Toxic
Made & Owned in Australia
Recyclable Container


Leather Hero; Australia's Premier Supplier of Leather Care & Repair Products

Use what the professionals use to repair surface damage in leather. Super strong and highly flexible, Leather Hero's Fill (No.15) is water-based, air drying, sandable and so easy to use.

Leather Filler (No.15) is available in a range of colours and the white version can be tinted using a small amount of Leather Hero Paint or Dye. It's ideal for filling small holes, pet damage, scratches and scuffs. Whilst remaining flexible, it's also sandable. This means you can achieve a smooth finish before recolouring. Use it on your leather sofa, on your leather car seats or on your boat.

Easy to use, odour-free and water-based, you'll love the transformations you'll achieve with this industry best leather repair product. Available in a leather repair kits.


Additional information

Weight N/A
Dimensions N/A
Master Colours

, , , , , , ,


, ,

Directions & Tips


  1. Load some filler to the back of a palette knife
  2. With light pressure, draw the filler across the repair site so that a thin layer is pushed into any cavities
  3. Allow drying before applying further layers as needed
  4. When all areas have been filled and dried, achieve a smooth finish by gently sanding with fine-grit sandpaper (400-800)
  5. Wipe area free of dust before colouring


  • White filler can be tinted using leather paint and dyes. Recolouring is required to conceal the treated area
  • Apply in very thin layers
  • Ensure each layer is dry before applying the next layer
  • Air dry in approximately 1 hour or use a hairdryer or heat gun at 30cm to promote faster curing
  • Best suited to scuffs, cat scratches, nicks and concealing joins
  • Can be texturised by using a stippling technique to somewhat mimic the appearance of leather grain
  • Wash up in water
  • Keep airtight and use clean implements that are free of bacteria to avoid spoilage
  • Use immediately. Not suitable for storage
  • Leather that is impregnated with hair and body oils may prevent adhesion or eventually repel filler and coatings



Sizes & Coverage

Treat coverage estimates as a guide only. Your requirements may differ. Variables impacting product coverage include the type and condition of the leather, fill depth as well as process and application methods.

Pack contains enough product to complete lots of typical leather repairs. 20gms is usually enough to repair several small surface issues or 2 or more patches of cat scratches.

"Leather Hero was highly recommended and for good reason, incredible result. Thanks"


Related Products